It is not possible, the pollutants remain in pole position away from pollutants such as silt, brown, cloudy water, algae, etc. Over time, many grab your pool surface and make it look so evil and bad. A good cleaning is needed to keep their clean look and post full of life. To address specific pollutants and mold, you must take help clarify that the key chemicals of some algae, water and chlorine and shock the pool. Keep pin protector keep everything clean and hygienicenvironment there. Dirty pool but can be seen not only in bad condition, but do not feel to swim in it, and it may also be problems Some skin.
Required Documents
– Guard algae
– Chlorine
– Chlorine Dispenser
– Garden hose
– HOSE
– Pol brush
– Pol-Filter
– Pol Hose
– Pol pump
– Pol Shock
– Pol Skimmer
– Pin-stripe
– Water Clarifier
Instructions
If you cover beforethe pool, remove it carefully.
Take the second pool skimmer and remove all visible debris and dirt from the surface of the pool. This will ensure that your pool filter is not clogged. First, consider the rest of the top, then slide the bottom of the pool.
Before the third pool filter, clean water and washed. Use a garden hose and pressure of the filter to remove dirt. Enjoy the filter with water.
Fourth Installpool filter pool pump from the container properly. Linking polarized filter and pump with the pool pump and filter change the pool water through the rinse.
And fifth 'best clean sections of the pelvic floor. This will help to correct the bottom of the pool. Brush and Tube Wool is the best option to pool, clean the bottom des Here are some brands are hard to remove, butSome may be permanent.
Sixth Keep an eye on the pool filter and cleaning by your conference. You may need to pool, clean the filter 2-3 times during the cleaning of debris, fill with water because e.
Whenever you remove the filter washed thoroughly with water. Following is installed properly and return to work.
Seventh After cleaning is finished, now is the time, sewage Add algae guard, shook water swimming pool, keep clean yourand free of algae and bacteria for a long time.
8th Remove dust, shock and the required amount at the edges of the basin. If you need assistance pool distributed evenly mixed with the brush of water.
Ninth, then take the water purification and paste the pool the same way that the powder applied shock. Stir well and with the help of the brush pool.
Take dough tenth guard and algae in the same way as dust and water shock Clarifier. Find a time and ensure that all three were mixed properly with water and nothing has been decided in the lower pole.
11 Leave the pump in the pool. Take the hose and brush the pool and the cover (solar blanket or anything suitable) pool surface to keep it free from impurities.
12 ° The next morning, remove the upper surface of the pool. Make a test strip and dip in chemical> The water from the pool and keep it there motionless for some time. Soon you'll see the color of the tape changes. Compare the color with the color levels on the packaging of chemical test strips.
This color will not help if you need quantities of chemicals in the pool or not. If necessary, add more chemicals to add. The levels of chemicals in value and alkalinity in the pool must be stable and in equilibrium with the pH.
13 Every day should begin withStep 12 Then continue with step 6. You must complete the step 11. This process continues until you find the pool water clear and hygienic. The process continues swimming for several days, depending on its condition.
14th should be checked on the strip in everyday life and to ensure that the levels of chemicals should remain stable and in accordance with the specifications.
15th Eventually you must fix the bleach in the pool distributor Keep. FilledWater for the supply of chlorine and chlorine This is the required level needed to keep the pool clean. Twice the amount of chlorine in the summer and its high use.
My Links : Online baby store Indoor garden
